20m vs 22m High Mast Lighting Poles: Engineering Drawing and BOQ Guide

Compare 20m and 22m high mast poles for infrastructure tenders. Review wind loads, foundation drawings, LED layouts and BOQ requirements.

Comparing a 20m and 22m high mast lighting pole is not simply a matter of adding two meters of steel. For importers and EPC buyers, each height needs its own approved structural design, foundation interface and lighting layout.

SUNLUX 22 meter high mast pole visual reference
SUNLUX 22 meter high mast pole visual reference

1. Nominal Height Is Only One Design Parameter

A 20-meter and a 22-meter pole can differ in shaft sections, diameters, plate thickness, base plate, anchor bolts and maintenance access. These dimensions cannot be inferred from height alone. Use only the approved drawing for the exact model and project.

2. Compare Specifications Side by Side

Item 20m high mast 22m high mast
Nominal height 20 meters 22 meters
Shaft diameter and thickness Per approved 20m drawing Per approved 22m drawing
Base plate and anchor bolts Per 20m foundation design Per 22m foundation design
Wind resistance Site-specific calculation Site-specific calculation
Floodlight quantity and power Photometric and structural verification Photometric and structural verification

3. Check the LED Lighting Arrangement

Fixture count, beam angle, aiming, luminaire weight and projected wind area affect the design. A 12 × 300W arrangement and a 12 × 1000W arrangement have very different electrical and optical characteristics. Neither option should be accepted without photometric and structural checks.

Modular LED floodlight assembly for high mast lighting projects
Modular LED floodlight assembly for high mast lighting projects

4. Base Plate, Anchor Bolts and Foundation

Confirm base plate size, bolt pattern, anchor bolt grade and embedment, cable entry and soil design assumptions. Even when two pole drawings look similar, foundation interfaces may not be interchangeable.

5. Maintenance and Electrical Requirements

Review maintenance doors, cable clamps, fuse holders, earthing, lightning protection and safe access arrangements. Requirements differ by tender and local regulations.

6. Avoid These Common Tender Errors

  • Submitting a 22m drawing for a 20m requirement.
  • Copying anchor bolt dimensions between different pole designs.
  • Assuming a luminaire wattage guarantees the required lux level.
  • Omitting design wind speed or structural calculations.
  • Leaving coating and inspection standards unspecified.

FAQ

Is a 22m pole always better than a 20m pole?

No. The right height depends on the site layout, lighting targets, structural requirements and cost.

Can the same foundation be used for both heights?

Only if a qualified engineer verifies the foundation and anchorage for both designs. Do not assume interchangeability.

Related resources: 20m high mast pole procurement guide; steel pole fabrication and galvanizing; high mast lighting selection guide.

Request a SUNLUX High Mast Project Quotation

Send your BOQ, pole height, quantity, site wind speed, luminaire layout, project country and destination port to sales@sunluxledlighting.com. Contact our team on WhatsApp +86 191 8978 2897 for a factory quotation and drawing review.

Share:

More Posts

Send Us A Message